Professional Dishwasher Installation by a Plumber: Why It's a Smart Move

Professional Dishwasher Installation by a Plumber: Why It's a Smart Move

Blog Article


How do you really feel on the subject of Dishwasher Repair & Installation Services?

Should You Install Your Own Dishwasher?
From carrying a dish washer into your house to connecting the water connections, installing a dish washer can take up to 5 hrs. A plumber will have the right tools on hand and can mount your new dishwasher in under 2 hrs.

Not Mounting Your Dishwashing Machine Properly Can Result In a Mountain of Issues

Not only can installing a dish washer appropriately void your service warranty, but it can likewise develop a mess. If you inaccurately install your dishwashing machine to the rubbish disposal, you might observe poignant scents or have residue on your dishes.

An Improper Setup Can Invalidate the Dishwasher's Warranty

Before setting up a dish washer on your own, you must review the service warranty carefully. Even somewhat harming the dish washer throughout the installment process can void the warranty. Because the expense of a dish washer varies in between $300 to $1,000 and also upwards, that can be a pricey blunder. Even if the dishwasher still works, you will certainly not be able to change it should it break shortly. Unless you are handy as well as have experience mounting dish washers, you should hire a plumber so you don't risk your warranty.

Mounting a Dishwasher Calls For a Selection of Devices

If you do not have a range of devices on hand, you may require to make a journey to Lowe's or Home Depot. To set up a dishwasher, you need the adhering to tools: pliers, a flexible wrench, a set of screwdrivers, a tube cutter, as well as opening saws.

A Plumber Can Inspect the Supply Lines

A supply line, particularly a dish washer connector, links the dish washer to a water source. If you get a new supply line, a plumber can guarantee that the line works with both your dishwasher and water source. An expert plumber can check it to ensure that it's in good condition as well as does not have any type of leakages if you determine to make use of an existing supply line.

A Plumber Can Finish the Job Affordably and Rapidly

A plumber can install your dishwasher in one to 2 hrs. The typical plumber won't bill even more than a couple of hundred dollars to mount your dishwasher.
From hauling a dishwasher right into your residence to connecting the water links, mounting a dish washer can take up to five hours. To make your life easier and also to stay clear of setting up a dishwasher inaccurately, we advise employing an expert plumber. A plumber will have the right devices on hand as well as can install your new dish washer in under 2 hours. Unless you are handy and also have experience installing dishwashing machines, you ought to employ a plumber so you don't risk your service warranty.
A supply line, especially a dishwashing machine port, links the dishwashing machine to a water source.

How To Install A Dishwasher

Installing A Dishwasher Yourself

Just like other home appliances, a dishwasher helps to make chores less time-consuming and free of hassle. Most modern kitchens have a dishwasher or a cabinet space for dishwasher installation built into them. An older kitchen with no dishwasher or cabinet space for one might require a little reconstruction to accommodate dishwasher installation.

Installing a dishwasher requires basic knowledge of plumbing and electrical wiring. This article contains the steps involved in dishwasher installation, dishwasher installation tips, things to consider when installing a dishwasher in a kitchen that previously had no dishwasher in it, and tips for maintaining a dishwasher.

Steps Involved In Dishwasher Installation

Step One: Gather the Necessary Supplies

Gather all the required items and keep them near the installation site for easy reach. The materials and tools you will require include the following:

  • A screwdriver

  • • A hose clamp

  • • Duct tape (optional)

  • • A brass fitting

  • • Teflon tape

  • • A pair of pliers

  • • An adjustable wrench

  • • A drill

  • • Braided steel water line

  • • A pair of rubber hand gloves (optional)

  • • Wire nuts

  • Step Two: Take Safety Measures

    First, turn off the power socket and unplug the power cord if it is a plug-in dishwasher. Then, proceed to turn off the circuit breaker. Next, turn off the hot water shut-off valve under the kitchen sink and run the tap to ensure the water supply is shut off. Protect your kitchen floor close to the installation area with an old rug or a piece of drop cloth.

    Step Three: Remove the Old Dishwasher

    This step only applies if your kitchen has an old dishwasher that you want to replace. Remove the cabinet door to gain complete access to the old dishwasher. Next, remove the cover of the access panel located at the bottom front side of the dishwasher. Locate the junction box inside the access panel.

    Now, unscrew the terminal screws holding the wires in place at the junction box. Then, remove and tuck the wires out of the way with duct tape. Locate the dishwasher water inlet tube, undo the brass fitting and disconnect the water supply pipe from it. Put the disconnected end of the water supply line pipe into a bucket or bowl to collect any water remaining in it.

    Reach down beneath the sink to undo the drain hose. Loosen, then clamp and disconnect the drain hose of the dishwasher from the tailpiece of the sink. Next, put the disconnected end of the drain hose into a bucket to collect the water and debris.

    With all the connections out of place, remove the screws holding the dishwasher in place with a screwdriver, gently pull the dishwasher out from the cabinet and set it aside. You can use a piece of cloth or towel to clean up the mess made or any water spillage on the floor. Also, clean the cabinet where the old dishwasher was before installing a new one.

    Skip this step if you are having a dishwasher installed for the first time in your kitchen.

    Step Four: Install the New Dishwasher

    Connect the Water Supply

    Wrap Teflon tape on the tip of the water inlet pipe located at the bottom of the dishwasher. Screw on the 90 degrees brass fitting to the taped inlet pipe and tighten it with an adjustable wrench. Most dishwasher units do not include a brass fitting, but they are available at hardware stores.

    Once you have the fitting, connect the new water supply line to the elbow of the brass fitting. Pass the other end of the waterline through one of the cabinet holes and place it on the floor beneath the kitchen sink.

    Attach the Drain Line

    Locate the dishwasher drain standout pipe, connect the drain line to the dishwasher, and secure the connection with a hose clamp. Pass the other end of the drain line through the cabinet hole and place it towards the sink drain tailpiece

    Slide the Dishwasher into Place

    Attach the adjustable legs to the front of the dishwasher. Carefully slide the dishwasher under the countertop into the cabinet. Stop halfway and ensure everything is in a good position before sliding it in completely. Finish hooking up the water line by connecting the other end to the dual shut-off valve located under the kitchen sink.

    Proceed to connect the drain hose through an air gap to your garbage disposer, if you have any, or to the drain tailpiece of your sink. If you do not have an air gap, make a high loop with the drain hose before connecting it to the garbage disposal or the sink drain tailpiece.

    Dishwasher Installation

    I was made aware of that report on Most Common Dishwasher Installation through an associate on a different web page. Appreciated our write-up? Please share it. Help other people locate it. We thank you for reading our article about Should You Install Your Own Dishwasher?.

    Schedule Now

    Report this page